VpCI®-418 LM

VpCI-418 LM is a non-foaming, heavy-duty alkaline cleaner/degreaser for cleaning industrial, oil field, commercial and marine equipment. Cortec VpCI 418 LM is designed for power washing machinery, high agitation parts washers, and high-pressure spray washers. VpCI-418 LM is silicate free (as opposed to VpCI-418 L), giving the maximum surface cleanliness after cleaning.

VpCI-418LM is non-flammable, nitrite-free, non-toxic and does not present disposal problems associated with most phosphate cleaners. VpCI-418 LM contains inhibitors to protect metal parts from corrosion after cleaning. It has a unique ability to remove difficult deposits such as heavy hydrocarbons, greases, drawing and buffing compounds, and mill and machinery oils. Available in 5 (Cortec Product Code: 11602715) or 55 gallon drums (Cortec Product Code: 11602716).

FEATURES:

  • VpCI-418 LM is silicate free, giving the maximum surface cleanliness after cleaning
  • Heavy-duty alkaline cleaner and degreaser with unique cleaning action for removing hydrocarbon deposits
  • Nitrite- and amine-free
  • Contains an inhibitor package for multimetal protection
  • Requires mechanical action to be effective
  • Leaves no residual film and will not affect paint adhesion qualities
  • Prevents flash rust
  • Safe to use on glass and most plastics
  • Non-foaming

 

EFFECTIVE USES:

  • Machinery, engine blocks, or forgings coated with grease or oil deposits
  • Plate, sheet metal and metal castings covered with oily films prior to painting or pickling
  • Metal parts contaminated with stamping, drawing or buffing compounds
  • Pressure washing

 

APPLCATION: VpCI-418LM can be applied using power washers and sprayers. Mix VpCI-418 LM into water until fully dissolved. Take pH and refractometer measurements to establish benchmark readings. VpCI-418LM is recommended for use in temperatures ranging from 95 – 160 degrees F (35-71 degrees C).

RECOMMENDED DILUTIONS:
Light Cleaning: Use 3-5% (by weight) VpCI-418 LM in water.
Normal Cleaning: For machinery, rail cars, offshore equipment and tanks contaminated with medium deposits, use 5-7% (by weight) VpCI-418LM in water.
Heavy-duty Cleaning: For drilling mud, crude, bilges, concrete surfaces and structures, use 7-10% (by weight) VpCI-418 LM in water.
Steam Cleaning: Use 3-5% (by weight) VpCI-418 LM in water.

PROPERTIES:
Appearance: Yellow to amber clear liquid
pH: 10.1 – 10.6 (1% aqueous)
Non-volatile Content: 8-10%
Density: 8.6 – 8.7 lb./gal. (1.03 – 1.04 kg/l)

Reviews

There are no reviews yet.

Be the first to review “VpCI®-418 LM”

Your email address will not be published. Required fields are marked *

Post comment